MPI proof loadclean Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_400/800_Proofing Trendsetter_NEWS Trendsetter_Series_4 This parameter is used to control whether to use receiver load clean and donor load clean sequence. The load clean sequence is to move the cleaning roller up against the VR while loading proofing media to clean the back side of the media. LoadClean = 0 : No receiver load clean and No donor load clean. LoadClean = 1 : Receiver load clean only. No donor load clean. LoadClean = 2 : Donor load clean only. No receiver load clean. LoadClean = 3 : BOTH receiver and donor load clean (default). LoadClean = 4 : BOTH receiver and donor load clean with extra trailing edge cleaning. This parameter is available.

3

0 to 4

18-Oct-2001 Normal

..\..\ShowAllErrors.htmFirmware 1 Error Index

..\..\ShowAllCommands.htmFirmware 1 Command Index

..\..\ShowAllParameters.htmFirmware 1 Parameter Index

Updated: Thu Jul 17 07:24:06 2008 PST